
Superbooster® USB 1.1 Over Cat5 Extender Wall Plate Kit
#29342
C2G
Superbooster® USB 1.1 Over Cat5 Extender Wall Plate Kit is rated
out of
5 by
7.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$189.99 $210.99 MSRP USD
Conquer USB length limitations, and put your USB devices where you want them with our patent-pending USB superbooster wall plate. This wall plate solution extends the distance of a USB device to a host computer up to 150 feet so you can place your USB projector, camera, printer, web cam, hub, or any other USB device exactly where you want it! This wall plate is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.
This plug-and-play device consists of a transmitter unit and a receiver unit incorporated into two, single gang wall plates. The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 patch cables (not included) allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices or any other facility where you don't want unsightly visible cables lying around.
Use pre-terminated network cables or pull unterminated cable and terminate with toolless IDC RJ45 connectors (included). Bus-powered, the USB superbooster wall plate requires no external power source. Compliant with USB Specification 1.1.
Transmitter Connectors: One USB Type B Female (Input) and One RJ45 Female (Output)
Receiver Connectors: One RJ45 Female (Input) and One USB Type A Female (Output)
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
More
This plug-and-play device consists of a transmitter unit and a receiver unit incorporated into two, single gang wall plates. The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 patch cables (not included) allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices or any other facility where you don't want unsightly visible cables lying around.
Use pre-terminated network cables or pull unterminated cable and terminate with toolless IDC RJ45 connectors (included). Bus-powered, the USB superbooster wall plate requires no external power source. Compliant with USB Specification 1.1.
Transmitter Connectors: One USB Type B Female (Input) and One RJ45 Female (Output)
Receiver Connectors: One RJ45 Female (Input) and One USB Type A Female (Output)
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
Connector 1:
(1) USB-B Female
Connector 2:
(1) USB-A Female
Quantity
295 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Extends a USB 1.1 signal up to 150ft over category cables
- Allows for flexible positioning of USB peripherals
- Transmitter and receiver are built into wall plates
- Kit includes both the transmitter and receiver units
- Patented, Patent No. US 7,741,562
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov